|
|
Bladder Pumps
|
|
|
|
Soil Sampling Components
|
|
Auger Buckets
Auger Buckets are available in “Regular” configuration with solid sides, in a “Mud” configuration with cutaway sides for extraction of tight samples, and a “Sand” configuration with the blades tapered closer together to better hold loose soils. The hardened blades are slightly larger in diameter than the auger body to reduce friction. Our Auger Buckets use high carbon steel bits with tungsten carbide edges and choice of screw-together couplings, slip together Hex or slip together Round “Quick-Connect” couplings. EON stocks the standard 3¼-inch diameter, but other sizes are available. Specify connection type and plated or stainless steel.
|
HAND AUGER BUCKETS
|
| SSA 320 |
Regular Auger Bucket, 3-1/4" (Specify Connection T, H, R) |
T,H,R |
| SSA 321 |
Mud Auger Bucket, 3-1/4 |
T, H, R |
| SSA 322 |
Sand Auger Bucket, 3-1/4 |
T, H, R |
|
|
|
|
Extension Rods
Extension Rods are used between the T-Handle and the Auger Bucket to advance probes and hand augers to depth below the surface. The connections should be selected to match the probe or auger. Available in plated steel or stainless steel.
|
HAND AUGER EXTENSIONS
|
| SSA 331 |
Soil Sampling Extension Rod, 3-ft Zinc Plated |
T, H, R |
| SSA 341 |
Soil Sampling Extension Rod, 4ft Zinc Plated |
T, H, R |
|
|
|
|
Slide Hammer
Use our Slide Hammer to drive Soil Core Liners into resistant soils with our slide hammer. Attaches to Extension Rods by threaded connections. Rubberized coating reduces operator fatigue and improves safety.
|
HAND AUGER SLIDE HAMMER
|
| SSA 400 |
Slide Hammer, Standard 10.22lbs -Threaded |
|
|
|
|
T-Handle
A T-Handle attaches to the top Extension Rod for rotating hand augers into the soil. T-Handles are available with or without rubber-coated handles. Specify connections to match the probe or auger.
|
HAND AUGER TEE HANDLE
|
| SSA 351 |
Hand Auger Tee Handle |
T, H, R |
| SSA 109 |
Auger Quick Connect Pins, for Round |
|
|
|
|
Liners & Caps
These Liners function as sample retaining cylinders when used in the Soil Core Sampler. Plastic caps seal the ends of liners to help prevent loss of volatiles. Teflon swatches are available to line the caps. The sizes listed in the ordering block fit our Core Sampler. Other sizes are available.
|
LINERS AND CAPS
|
| SSC 120 |
Soil Core Liner, 1-1/2"-Brass |
| SSC 121 |
Soil Core Liner 1-1/2"-Clear Plastic |
| SSC 150 |
Soil Core Liner, 2"-Brass |
| SSC 151 |
Soil Core Liner 2"-Clear plastic |
| SSC 176 |
Liner End Caps, 2" |
| SSC 175 |
Liner End Caps, 1-1/ 2" |
| SSC 180 |
Teflon Swatches, 4"x4" |
|
 |
|
|
|
|
|
|
|
|
EON Products,
Inc. · Toll-Free:
(800) 474-2490
|
